|
 |
|
Daily, Weekly, Monthly and Yearly Maintenance Procedures
- Ongoing Daily Routine
a. Clean the floor daily with a soft towel (tack rag) wrapped around
the head of a large push broom. The Tack Rag should be damp
with luke-warm water. It should not drip. If the floor is used
heavily, tack the floor at least twice daily.
b. Wipe up spills and any moisture on the floor surface immediately.
c. Remove heel/scuff marks using an approved floor cleaner applied
with a soft cloth or a dusting mop. We recommend using Hillyard
Super Shine-All.
d. Make sure the Heating/Ventilating/Air Conditioning system is
functioning properly and set to maintain indoor relative humidities
between 35% and 50% year round. In areas where the outside
humidity is consistently high or low, a 15% fluctuation will not
adversely affect the maple.
e. Inspect the floor for tightening or shrinkage. If the floor has
expansion joints, see if they are beginning to close. Check the
expansion void around the perimeter. Check for any water leaks
around the doors, windows, under skylights, roof, and
ventilating systems.
- Quarterly
a. Use Hillyard Super Shine-All according to the manufacturers
instructions and thoroughly clean the floor.
- Yearly
a. Using #100 abrasive screen disks, abraid the floor thoroughly
at a rate of 500 sqft per disk. Take the shine off the existing
finish.
b. Clean the floor completely. Use a vacuum and then tack the floor
as described above. Ensure that no dust is left on the floor.
c. Using a lambs wood applicator, apply one coat of oil modified,
V.O.C compliant, high solids polyurethane.
d. Wait until dry and apply second coat of polyurethane.
e. Stay off the floor for a minimum of 72 hours prior to use.
- Every 7 to 10 years
a. Plan on sanding the floor to bare wood. In order to keep the
floor beautiful, it will be important, on a scheduled basis, to take
all the finish off the floor and start over again.
b. Call Mathusek Incorporated for a free consultation.
|
|